The motion sensors switch lighting off after a set period of time if no movement is detected.
Daylight dimming is also incorporated into the facility; on bright days the lights will dim automatically.
Turning Lights ‘On’
One single depression at the bottom of the switch turns the lights on to 100% (there is about 1-2 seconds delay before the lights come on)
Turning Lights ‘Off’
One single depression at the top of the switch, switches the lights off (there is about 1-2 seconds delay before the lights go off)
Reducing Lighting levels
- Press and hold the top of the light switch for up to 5 seconds. This will cause the lighting to reduce in 25% increments.
- When lights are reduced to 50% for example, then turned on again, they will revert to the last brightness level to which they were set.