Bachelor of Engineering with Honours
Faculty of Computing, Engineering and the Built Environment
School of Computing, Engineering and Intelligent Systems
Create a more sustainable world with renewable energy engineering. Refine and rethink clean energy sources such as wind, biomass, solar, and hydro.
This 4 year BEng Hons course prepares students for work within the emerging renewable energy industry and will allow you to make a difference in the world. Graduates will join a body of engineers with the vision and skills necessary to design and manufacture engineering systems and machines for the renewables industry. You will learn how to think innovatively and turn your ideas into useable technology.
Graduates with this mix of mechanical design, electronics, power systems and renewable energy engineering experience have many career opportunities available to them in this emerging sector. The course has a built-in year of work experience, where students work in industry during their third year, making it a highly practical degree.
So whether you want to engineer the next generation of renewable power systems or drive change and create ‘green cities’ then this degree will give you the knowledge and skills to do so.
In this section
This course is the part-time version of the BEng Renewable Energy Engineering degree and offers a flexible learning approach to study.
The duration of the course is in the range of four to seven years, depending on exemption from Level 4 and 5 modules (Years 1 and 2 of equivalent full-time course) and the rate of study.
On average students complete study at half the rate of a full-time student, completing 60 credits out of the 120 credits which make up each year of the equivalent full-time course. The maximum study load is 40 credits per semester.
The course includes modules in mathematics, electrical and mechanical science, materials and manufacturing, computer-aided design, electronic circuit design, electrical engineering, industrial management.
This course is currently in the process of renewing its Professional Body Accreditation. It is possible that there will be some changes to the course as described.
Attendance is part-time, day-time and typically requires one full day or two half-days per week for 12 teaching weeks each semester. The attendance requirements may vary from semester to semester.
Formal lectures are supplemented by tutorials and laboratory investigations, as appropriate. Practical hands on laboratory sessions are an integral part of many modules throughout all years of the course. Case studies, groupwork and mini-projects are also extensively used. In the final year there is a major individual project.
Generally, a combination of continuous assessment and examination is employed in each module. Continuous assessment includes class tests, library and laboratory based assignments, and individual and group project work. Some modules across all years of the course are continuously assessed.
The content for each course is summarised on the relevant course page, along with an overview of the modules that make up the course.
Each course is approved by the University and meets the expectations of:
As part of your course induction, you will be provided with details of the organisation and management of the course, including attendance and assessment requirements - usually in the form of a timetable. For full-time courses, the precise timetable for each semester is not confirmed until near the start date and may be subject to change in the early weeks as all courses settle into their planned patterns. For part-time courses which require attendance on particular days and times, an expectation of the days of attendance will often be included in the letter of offer. A course handbook is also made available.
Courses comprise modules for which the notional effort involved is indicated by its credit rating. Each credit point represents 10 hours of student effort. Undergraduate courses typically contain 10- or 20-credit modules and postgraduate course typically 15- or 30-credit modules.
The normal study load expectation for an undergraduate full-time course of study in the standard academic year is 120 credit points. This amounts to around 36-42 hours of expected teaching and learning per week, inclusive of attendance requirements for lectures, seminars, tutorials, practical work, fieldwork or other scheduled classes, private study, and assessment. Part-time study load is the same as full-time pro-rata, with each credit point representing 10 hours of student effort.
Postgraduate Masters courses typically comprise 180 credits, taken in three semesters when studied full-time. A Postgraduate Certificate (PGCert) comprises 60 credits and can usually be completed on a part-time basis in one year. A 120-credit Postgraduate Diploma (PGDip) can usually be completed on a part-time basis in two years.
Class contact times vary by course and type of module. Typically, for a module predominantly delivered through lectures you can expect at least 3 contact hours per week (lectures/seminars/tutorials). Laboratory classes often require a greater intensity of attendance in blocks. Some modules may combine lecture and laboratory. The precise model will depend on the course you apply for and may be subject to change from year to year for quality or enhancement reasons. Prospective students will be consulted about any significant changes.
Assessment methods vary and are defined explicitly in each module. Assessment can be via one method or a combination e.g. examination and coursework . Assessment is designed to assess your achievement of the module’s stated learning outcomes. You can expect to receive timely feedback on all coursework assessment. The precise assessment will depend on the module and may be subject to change from year to year for quality or enhancement reasons. You will be consulted about any significant changes.
Coursework can take many forms, for example: essay, report, seminar paper, test, presentation, dissertation, design, artefacts, portfolio, journal, group work. The precise form and combination of assessment will depend on the course you apply for and the module. Details will be made available in advance through induction, the course handbook, the module specification and the assessment timetable. The details are subject to change from year to year for quality or enhancement reasons. You will be consulted about any significant changes.
Normally, a module will have four learning outcomes, and no more than two items of assessment. An item of assessment can comprise more than one task. The notional workload and the equivalence across types of assessment is standardised.
The class of Honours awarded in Bachelor’s degrees is usually determined by calculation of an aggregate mark based on performance across the modules at Levels 5 and 6 (which correspond to the second and third year of full-time attendance).
Level 6 modules contribute 70% of the aggregate mark and Level 5 contributes 30% to the calculation of the class of the award. Classification of integrated Masters degrees with Honours include a Level 7 component. The calculation in this case is: 50% Level 7, 30% Level 6, 20% Level 5. At least half the Level 5 modules must be studied at the University for Level 5 to be included in the calculation of the class.
All other qualifications have an overall grade determined by results in modules from the final level of study. In Masters degrees of more than 200 credit points the final 120 points usually determine the overall grading.
Figures correct for academic year 2019-2020.
The University employs over 1,000 suitably qualified and experienced academic staff - 59% have PhDs in their subject field and many have professional body recognition.
Courses are taught by staff who are Professors (25%), Readers, Senior Lecturers (20%) or Lecturers (55%).
We require most academic staff to be qualified to teach in higher education: 82% hold either Postgraduate Certificates in Higher Education Practice or higher. Most academic staff (81%) are accredited fellows of the Higher Education Academy (HEA) by Advanced HE - the university sector professional body for teaching and learning. Many academic and technical staff hold other professional body designations related to their subject or scholarly practice.
The profiles of many academic staff can be found on the University’s departmental websites and give a detailed insight into the range of staffing and expertise. The precise staffing for a course will depend on the department(s) involved and the availability and management of staff. This is subject to change annually and is confirmed in the timetable issued at the start of the course.
Occasionally, teaching may be supplemented by suitably qualified part-time staff (usually qualified researchers) and specialist guest lecturers. In these cases, all staff are inducted, mostly through our staff development programme ‘First Steps to Teaching’. In some cases, usually for provision in one of our out-centres, Recognised University Teachers are involved, supported by the University in suitable professional development for teaching.
Figures correct for academic year 2021-2022.
Enjoy student life in one of Europe's most vibrant cities.
Our facilities in Magee cater for many sports ranging from archery to volleyball, and are open to students and members of the public all year round.
At Student Wellbeing we provide many services to help students through their time at Ulster University.
Here is a guide to the subjects studied on this course.
Courses are continually reviewed to take advantage of new teaching approaches and developments in research, industry and the professions. Please be aware that modules may change for your year of entry. The exact modules available and their order may vary depending on course updates, staff availability, timetabling and student demand. Please contact the course team for the most up to date module list.
In this section
This module provides students with a solid foundation in the fundamental topics in engineering mathematics. The material develops the student's competencies in the essential mathematics that forms an integral part of an undergraduate honours degree in engineering related disciplines.
The module provides a firm grounding in energy conversion through fundamental theory demonstrated in the analysis of conventional and renewable energy conversion systems.
This module includes freehand sketching, systems of projection, drawing conventions,
dimensioning and tolerancing, 3-D digital modelling of parts and assemblies, design
documentation, an introduction to the total design activity, formulation of a product design
specification (PDS), material selection and manufacturing considerations in design
A module which integrates formal study with a significant practical programme for the understanding and application of common manufacturing processes.
This module provides an introduction to the key electronic components, the basic concepts of electronic circuit design and the basic principles of electronic circuit testing and measurement taking. This module introduces the student to analogue electronics principles presented using a combination of lectures, tutorials and practical laboratories and are assessed using continuous assessment in the form of a class test and lab practical assessments.
MEC102 provides the fundamental principles of statics, strength of materials and dynamics in relation to mechanical engineering and provides a methodology for their practical application. Its content includes:
(a) Basic and derived units, static equilibrium, shear forces, bending moments and friction.
(b) Statically stressed systems both determinate and indeterminate, the theory of torsion and bending.
(c) This module provides an understanding of dynamics, and its application to the solution of engineering problems.
(d) The theoretical and practical principles required within each topic area will be developed in lectures and applied in assignments, tests and tutorials.
This module is designed to equip students with the appropriate research and transferable skills needed to secure employment within the Computing and Engineering domain.
The module prepares students for professional work by developing knowledge of the responsibilities and obligations of employees, employers and clients as determined by codes of professional conduct. Students will have the opportunity to practise the presentation of themselves in, for example, application forms, curriculum vitae, interview, elevator pitches and aptitude tests.
The module provides an underpinning foundation of research concepts, methods and techniques necessary for project development and delivery. The students employ research skills developed during the module to gather research from a variety of sources and critically review this literature. Embedded in all these activities is the reinforcement of the need for adhering to recognised ethical standards and taking a professional approach to employability.
This level 5 module will endow engineering students with the knowledge and skills to analyse and design control systems and signal processing systems.
Building on the fundamentals covered in ENE123 (EEE186 Magee), the aim is to develop design skills in the technologies and energy engineering involved with electricity generation, its supply, distribution and end use of electricity, both in a domestic and industrial context.
The module provides a general coverage of different classes of engineering materials. Metallic and non-metallic materials are studied with respect to structures, properties, and processing.
MEC360 provides an extension of the fundamental principles of the statics and dynamics of mechanical systems in relation to the analysis and solution of mechanical engineering problems. Furthermore, MEC360 provides an introduction to the core principles of thermodynamics.
The module considers creativity in design; product innovation; technical and non-technical
aspects of design; safety and product liability; design analysis techniques for economic
product manufacture and assembly; functional analysis; value engineering; safety and
reliability through design projects; manufacturing processes; assembly techniques; material
handling methods; component and product inspection and testing; factory simulation using
computer techniques; computer database application for manufacturing management and
processing; and design applications using 3-D computer graphics
This module covers major aspects of manufacturing technology including state-of-the-art for subtractive, additive, casting, and deformation processes. In addition, the module covers the technologies implemented in the integration of various manufacturing processes, thereby promoting a comprehensive understanding of manufacturing systems.
The module covers theoretical and practical aspects of power systems with a large proportion of decentralised energy production.
Thermal renewable energy technologies are primarily based on combustion or the direct conversion of solar radiation into thermal energy, but also include geothermal heat. They have wider range opportunities than electrical systems due to the widespread demand for low and medium grade heating and cooling in both industrial and domestic situations. This module introduces the students to these concepts and contextualises the issues.
This module is based on the execution of an industrially generated major design project
through multi-disciplinary team activity involving aspects of: project management, market
analysis, specification, concept design, budget costing, decision making, detail design,
production planning, manufacturing requirements and product costing.
This module is optional
This module will permit the student to develop their understanding in the scientific and mathematical principles that underpin three areas of mechanical sciences: Strength of Materials and Mechanical vibration theory.
Formal lectures, directed reading exercises, tutorial sessions, informal class quizzes, peer discussion groups, and practical computer laboratory demonstrations will form the learning activities that will lead to the intended learning outcomes.
Learning outcomes shall be assessed by formal in-class test methods throughout the duration of the module and by a final formal examination.
Students are required to undertake a major project during the final year of the course. The module offers students an opportunity to develop a realistic and meaningful piece of work during their final year. This module allows a chosen subject area to be researched in depth and a solution developed as a consequence. Students will have the opportunity to integrate and apply the learning achieved from other modules in the course. The module runs during both semesters and allows students to develop a comprehensive approach to all aspects of working on a large project. The project encourages innovation and creative thinking in the development of the solution. It also develops the entrepreneurial mindset, which can influence the challenges undertaken and final decisions made.
This module is optional
This module covers the principle concepts of analysis and protection of modern power systems. It builds upon the operation of power systems under normal operations, fault analysis and principle of power system protection.
We recognise a range of qualifications for admission to our courses. In addition to the specific entry conditions for this course you must also meet the University’s General Entrance Requirements.
In this section
You will normally be in full-time employment in an engineering capacity regarded as satisfying the industrial training requirements of the equivalent full-time courses. You should have attained a high level of performance in a Higher National Diploma/Higher National Certificate in an appropriate engineering subject, or a Bachelor of Technology degree, or hold an equivalent qualification e.g. Foundation Degree.
You will be required to satisfy the Course Committee that you have the support of your employer for release to attend the courses.
Please check the GCSE requirements below for entry to this course.
GCSE (or equivalent) profile to include minimum of Grade C or above in Mathematics and English Language.
The Faculty of Computing, Engineering and the Built Environment does not accept students with Essential Skills in Application of Number as the only mathematics qualification. Please contact the Admissions Office directly if you have a query concerning this matter:
English language requirements for international applicants
The minimum requirement for this course is Academic IELTS 6.0 with no band score less than 5.5. Trinity ISE: Pass at level III also meets this requirement for Tier 4 visa purposes.
Ulster recognises a number of other English language tests and comparable IELTS equivalent scores.
Transfer between this course and other similar courses within the Faculty of Computing, Engineering and the Built Environment may be possible on the basis of academic performance.
Exemption from parts of the course may be considered based on appropriate performance in a related, designated course or other approved experiential learning (APEL).
The course has been designed to enable students who graduate with a good honours degree to apply for postgraduate study towards a PhD, MSc, MRes or other higher qualification.
In this section
Job prospects in a wide range of engineering industries are excellent with the majority of graduates finding employment within six months of graduation. Graduates with BEng Hons, first class or upper second class award all satisfy the requirements for a wide range of postgraduate research posts and scholarships.
Accredited by the Institution of Mechanical Engineers (IMechE) on behalf of the Engineering Council for the purposes of fully meeting the academic requirement for registration as an Incorporated Engineer and partially meeting the academic requirement for registration as a Chartered Engineer.
The price of your overall programme will be determined by the number of credit points that you initiate in the relevant academic year.
For modules commenced in the academic year 2022/23, the following fees apply:
|Credit Points||NI/ROI Cost||GB Cost||International Cost|
NB: A standard full-time undergraduate degree is equivalent to 120 credit points per year.
It is important to remember that costs associated with accommodation, travel (including car parking charges) and normal living will need to be covered in addition to tuition fees.
Where a course has additional mandatory expenses (in addition to tuition fees) we make every effort to highlight them above. We aim to provide students with the learning materials needed to support their studies. Our libraries are a valuable resource with an extensive collection of books and journals, as well as first-class facilities and IT equipment. Computer suites and free Wi-Fi are also available on each of the campuses.
There are additional fees for graduation ceremonies, examination resits and library fines.
Students choosing a period of paid work placement or study abroad as a part of their course should be aware that there may be additional travel and living costs, as well as tuition fees.
See the tuition fees on our student guide for most up to date costs.
Central Admissions Magee
Course Director: Dr JP Quinn