2021/22 Part-time Postgraduate course
Postgraduate Certificate of Education
Faculty of Arts, Humanities and Social Sciences
School of Education
This course is a follow-on programme for those who have successfully completed the Certificate in Teaching.
In this section
The Postgraduate Certificate in Education (Further Education) PGCE (FE) (postgraduate level)
This course is a follow-on programme for those who have successfully completed the Certificate in Teaching. For acceptance onto the course students must meet the entry requirements as set out and must liaise with their employer in order to provide evidence that they are employed in an FE College or in the work based learning sector.
Sign up to register an interest in the course.
In this section
This course is a mandatory requirement for those working in FE Colleges.
Applications to our postgraduate courses are made through the University’s online application system.
Please note that the closing date for this course at the Jordanstown Campus is Friday 31 July 2020.
Days and times to be confirmed but will normally include one three-hour block of classes per week on Wednesdays
The content for each course is summarised on the relevant course page, along with an overview of the modules that make up the course.
Each course is approved by the University and meets the expectations of:
As part of your course induction, you will be provided with details of the organisation and management of the course, including attendance and assessment requirements - usually in the form of a timetable. For full-time courses, the precise timetable for each semester is not confirmed until close to the start date and may be subject to some change in the early weeks as all courses settle into their planned patterns. For part-time courses which require attendance on particular days and times, an expectation of the days and periods of attendance will be included in the letter of offer. A course handbook is also made available.
Courses comprise modules for which the notional effort involved is indicated by its credit rating. Each credit point represents 10 hours of student effort. Undergraduate courses typically contain 10- or 20-credit modules (more usually 20) and postgraduate course typically 15- or 30-credit modules.
The normal study load expectation for an undergraduate full-time course of study in the standard academic year is 120 credit points. This amounts to around 36-42 hours of expected teaching and learning per week, inclusive of attendance requirements for lectures, seminars, tutorials, practical work, fieldwork or other scheduled classes, private study, and assessment. Part-time study load is the same as full-time pro-rata, with each credit point representing 10 hours of student effort.
Postgraduate Master’s courses typically comprise 180 credits, taken in three semesters when studied full-time. A Postgraduate Certificate (PGCert) comprises 60 credits and can usually be completed on a part-time basis in one year. A 120-credit Postgraduate Diploma (PGDip) can usually be completed on a part-time basis in two years.
Class contact times vary by course and type of module. Typically, for a module predominantly delivered through lectures you can expect at least 3 contact hours per week (lectures/seminars/tutorials). Laboratory classes often require a greater intensity of attendance in blocks. Some modules may combine lecture and laboratory. The precise model will depend on the course you apply for and may be subject to change from year to year for quality or enhancement reasons. Prospective students will be consulted about any significant changes.
Assessment methods vary and are defined explicitly in each module. Assessment can be a combination of examination and coursework but may also be only one of these methods. Assessment is designed to assess your achievement of the module’s stated learning outcomes. You can expect to receive timely feedback on all coursework assessment. The precise assessment will depend on the module and may be subject to change from year to year for quality or enhancement reasons. You will be consulted about any significant changes.
Coursework can take many forms, for example: essay, report, seminar paper, test, presentation, dissertation, design, artefacts, portfolio, journal, group work. The precise form and combination of assessment will depend on the course you apply for and the module. Details will be made available in advance through induction, the course handbook, the module specification and the assessment timetable. The details are subject to change from year to year for quality or enhancement reasons. You will be consulted about any significant changes.
Normally, a module will have 4 learning outcomes, and no more than 2 items of assessment. An item of assessment can comprise more than one task. The notional workload and the equivalence across types of assessment is standardised.
Calculation of the Final Award
The class of Honours awarded in Bachelor’s degrees is usually determined by calculation of an aggregate mark based on performance across the modules at Levels 5 and 6, (which correspond to the second and third year of full-time attendance).
Level 6 modules contribute 70% of the aggregate mark and Level 5 contributes 30% to the calculation of the class of the award. Classification of integrated Master’s degrees with Honours include a Level 7 component. The calculation in this case is: 50% Level 7, 30% Level 6, 20% Level 5. At least half the Level 5 modules must be studied at the University for Level 5 to be included in the calculation of the class.
All other qualifications have an overall grade determined by results in modules from the final level of study. In Master’s degrees of more than 200 credit points the final 120 points usually determine the overall grading.
The University employs over 1,000 suitably qualified and experienced academic staff - 59% have PhDs in their subject field and many have professional body recognition.
Courses are taught by staff who are Professors (25%), Readers, Senior Lecturers (18%) or Lecturers (57%).
We require most academic staff to be qualified to teach in higher education: 82% hold either Postgraduate Certificates in Higher Education Practice or higher. Most academic staff (81%) are accredited fellows of the Higher Education Academy (HEA) - the university sector professional body for teaching and learning. Many academic and technical staff hold other professional body designations related to their subject or scholarly practice.
The profiles of many academic staff can be found on the University’s departmental websites and give a detailed insight into the range of staffing and expertise. The precise staffing for a course will depend on the department(s) involved and the availability and management of staff. This is subject to change annually and is confirmed in the timetable issued at the start of the course.
Occasionally, teaching may be supplemented by suitably qualified part-time staff (usually qualified researchers) and specialist guest lecturers. In these cases, all staff are inducted, mostly through our staff development programme ‘First Steps to Teaching’. In some cases, usually for provision in one of our out-centres, Recognised University Teachers are involved, supported by the University in suitable professional development for teaching.
Figures correct for academic year 2019-2020.
The largest of Ulster's campuses.
Jordanstown is our biggest campus in an idyllic setting surrounded by lush lawns and trees. It's just a few hundred metres from Loughshore Park and promenade, and just seven miles from Belfast city centre.
At our Jordanstown Campus we have world class facilities that are open all year round to our students and members of the public.
At Student Support we provide many services to help students through their time at Ulster University.
Here is a guide to the subjects studied on this course.
Courses are continually reviewed to take advantage of new teaching approaches and developments in research, industry and the professions. Please be aware that modules may change for your year of entry. The exact modules available and their order may vary depending on course updates, staff availability, timetabling and student demand. Please contact the course team for the most up to date module list.
In this section
This module offers learners the opportunity to complete a short action research project within their own subject discipline, drawing upon contemporary literature and theory. They are encouraged to address issues and initiate solutions by being adventurous within their own classrooms and trialling new pedagogic techniques and approaches. They will be able to draw on peer and tutor feedback to implement new ideas and evaluate them for dissemination across the wider FE sector.
This module offers learners the opportunity to explore new structures in terms of processes, design assessment and support mechanisms that will enhance quality. Collaborative learning and action based investigative studies will facilitate the transfer of support and information during this module. Quality indicators will be investigated to enhance the future development of learning programmes, configured using customised and accessible units of assessment and outcomes driven objectives.
Students have completed work on a wide range of themes including:
Enterprise and Innovation
Technology Enhanced Learning
Problem based learning
We recognise a range of qualifications for admission to our courses. In addition to the specific entry conditions for this course you must also meet the University’s General Entrance Requirements.
In this section
To be eligible to apply all applicants should normally:
You must submit your Diploma to claim this exemption. Please note that it is only the Diploma and not the Certificate which can be used to progress straight to the PGCE (FE) programme.
English language requirements for international applicants
The minimum requirement for this course is Academic IELTS 6.0 with no band score less than 5.5. Trinity ISE: Pass at level III also meets this requirement for Tier 4 visa purposes.
Ulster recognises a number of other English language tests and comparable IELTS equivalent scores.
Typically we require applicant for taught programmes to hold the equivalent of a UK first degree (usually in a relevant subject area). Please refer to the specific entry requirements for your chosen course of study as outlined in the online prospectus. We consider students who have good grades in the following:
Typically, we require applicants for taught programmes to hold the equivalent of a UK first degree.
Please refer to the specific entry requirements for your chosen course of study as outlined in the online prospectus.
The comparable US qualifications are as follows:
UK 2:1 Degree - Bachelor degree with a cumulative GPA of 3.0 out of 4
UK 2:2 Degree - Bachelor degree with a cumulative GPA of 2.6 out of 4
|Level 12 English Lang in HSD|
In this section
This is an in-service course and you must be employed to undertake this programme.
In this section
Students who are supported by their colleges (FE colleges and CAFRE) will have their observations completed by an in-house observer who has undergone training at Ulster University. This usually applies to full-time or associate lecturers who are fully supported – ie having their full fees paid and remission allowed.
Some students who are working in FE but are self-funding have been able to negotiate that their college will complete their observations. Not all colleges provide this support however, so it is the responsibility of the applicant to investigate this with their employer and notify the University of the decision during the application process.
Those outside the FE College partnership (FE employed students who are NOT having their observations covered by the college, and ALL WBL employed students) will be required to undertake a University supervised observation. This will incur an additional fee of £400 pounds on top of the standard fee.
Course Director: Dr Tracy Irwin
Admissions Contact: Julie Pattison