This course offers students a broad engineering experience designed to suit the current needs for Electrical and Electronic Engineering.
The BEng Hons Electrical and Electronic Engineering degree will prepare you to become a professional electrical engineer, working on electrical products and systems, from research and design to installation. It will be your job to deal with the input of power to electrical systems, as well as with data acquisition and gathering.
You will be qualified to work in many areas, including power generation and control, transportation, IT, manufacturing, construction and telecommunications.
Most electrical engineers work with large-scale electrical systems, such as using electricity to transmit energy, however a wide range of technologies are being developed, from household appliances and installing lighting within buildings, to power stations and satellite communications.
The course has a built-in year of work experience, where students work in industry during their third year, making it a highly practical degree with highly trained graduates.
Sign up for course updates
Sign up to receive regular updates, news and information on courses, events and developments at Ulster University.
We’ll not share your information and you can unsubscribe at any time.
Our vision is aligned to the strategic growth plan for the city and regionWatch the video
About this course
In this section
This course aims to prepare graduates to contribute to the electronic and electrical power industry. The course will develop theoretical and practical skills in electronics, power and renewable energy engineering which are widely sought after across the wider engineering sector.
Year 1 provides an understanding of fundamental electrical and electronic engineering principles. It equips students with additional mathematical skills, identifies the potential of computer-based information handling, analysis and graphics, and develops the skills necessary for effective communication. Topics covered include electrical circuits, engineering mathematics, electrical systems, electrical technology, design and CAE and professional studies.
Year 2 builds on those skills developed in year 1. Students’ analytical skills are enhanced through their involvement in a wide range of engineering situations and roles. In the field, engineers will be expected to prepare project specifications, undertake research, create test procedures, write reports and interpret data. Modules offered are: control theory and applications, engineering analysis, electrical services, microprocessor design, power and communications.
Year 3 Industrial placement. The third year is spent on Industrial Placement, an integral and compulsory part of the course. The student works as a trainee engineer in a relevant company and is paid an attractive salary. During placement, students develop key skills including project management, leadership and communication, as well as commercial awareness, which are crucial to being a professional electrical engineer.
Year 4 Students in their final year will study topics which include industrial automations and control, design, industrial applications and undertake a final year project.
Diploma in Professional Practice DPP
Diploma in International Academic Studies DIAS
Diploma in Professional Practice International DPPI
Find out more about placement awards
Attendance is full-time and is normally spread over a week. There are 12 weeks of teaching each semester and in full-time mode students cover 2 semesters per year. Between semesters students complete exams. Details of teaching times and dates are available on request.
Each student must complete 120 credits (usually 6 modules) in each academic year, with the exception of placement year (60 credits). Years 1, 2 and 4 are spent in the University. Modules are taught on campus and are web-supplemented. In Year 3, students undertake a years work experience.
- September 2019
Here is a guide to the subjects studied on this course.
Courses are continually reviewed to take advantage of new teaching approaches and developments in research, industry and the professions. Please be aware that modules may change for your year of entry. The exact modules available and their order may vary depending on course updates, staff availability, timetabling and student demand. Please contact the course team for the most up to date module list.
In this section
Mathematics for Engineering I
This module provides students with a solid foundation in the fundamental topics in engineering mathematics. The material develops the student's competencies in the essential mathematics that forms an integral part of an undergraduate honours degree in engineering related disciplines.
Field and Devices
This module will introduce the fundamental concepts of electrostatic and electromagnetic, related rules, electric and magnetic materials and their characteristics, and their applications in physical systems.
Programming for Engineering
This module provides students with a solid foundation in developing software programs using a procedural programming language. It utilises a middle-level language to enable the engineering student to understand the relationship between software programs and the underlying hardware on which the program operates, whilst learning the key concepts and skills relevant to many modern high-level languages.
Digital Electronics I
This module introduces the fundamentals of digital electronic devices and simple logic circuits as well as basic logic design techniques. The module introduces the student to basic digital electronics principles presented using a combination of lectures, tutorials and practical laboratories and are assessed using continuous assessment in the form of a written class test and lab practical assessments.
Circuit Analysis I
This module provides an introduction to the key electronic components, the basic concepts of electronic circuit design and the basic principles of electronic circuit testing and measurement taking. This module introduces the student to analogue electronics principles presented using a combination of lectures, tutorials and practical laboratories and are assessed using continuous assessment in the form of a class test and lab practical assessments.
Design and CAD I
This module includes freehand sketching, systems of projection, drawing conventions,
dimensioning and tolerancing, 3-D digital modelling of parts and assemblies, design
documentation, an introduction to the total design activity, formulation of a product design
specification (PDS), material selection and manufacturing considerations in design
The module prepares students for professional work including the responsibilities and obligations of employees, employers and clients as determined in codes of professional conducts. Students will have the opportunity to practise the presentation of themselves in, for example, application forms, curriculum vitae, interview and aptitude tests. In addition the module addresses issues such as intellectual property rights and defamation, data protection, computer misuse and other ethical issues related to working as a professional in the software sector.
This module introduces embedded C programming. The focus is on embedded programming concepts targeting the design of embedded programs for dedicated micro-processor/controllers hardware used in a wide array of modern applications such as automobiles, domestic appliances and mobile technology including IoT systems.
Mathematics for Engineering II
This module introduces students to the essential mathematics with appropriate numerical computing and programming required for embarking on further study in engineering, computing or a related discipline. It develops the students mathematical skills required to solve problems that arise in the context of their undergraduate study. The module content is introduced in a pragmatic way and then related to real world problems, which enhances understanding and makes the concepts more meaningful and relevant for the student. The module also aims to generate in the student a spirit of mathematical investigation and discovery leading to the development of mathematical confidence. An introduction is given to MatLab, the multi-paradigm numerical computing environment and fourth-generation programming language; assessment in also partially completed in MatLab.
Digital Electronics II
This module introduces digital building blocks and the principles of modern digital systems design. The module also discusses performance issues related to the realisation of digital systems. Both elements of the module are presented through lectures, tutorials and practical sessions and are assessed using both continuous assessment and formal written examination methods.
Circuit Analysis II
This module introduces the principles of design of analogue and digital building blocks which can be integrated to form electronic systems of moderate complexity. The module also discusses issues related to the interfacing of analogue and digital signals. Both elements of the module are presented through lectures, tutorials and practicals and are assessed using both continuous assessment and formal written examination methods.
Power System Analysis and Protection
This module covers the principle concepts of analysis and protection of modern power systems. It builds upon the operation of power systems under normal operations, fault analysis and principle of power system protection.
Electrical and Energy Engineering
Building on the fundamentals covered in ENE123 (EEE186 Magee), the aim is to develop design skills in the technologies and energy engineering involved with electricity generation, its supply, distribution and end use of electricity, both in a domestic and industrial context.
International Academic Studies - Computing
This module is optional
This module provides an opportunity to undertake an extended period of study outside the UK and Republic of Ireland. Students will develop an enhanced understanding of the academic discipline whilst generating educational and cultural networks.
Placement - Magee Engineering
This module is optional
This module is a year's paid industrial placement programmed to complement the undergraduate engineer's academic studies. The student will be employed as a junior engineer to enable improvement in their understanding of the work environment and development of their transferable, communication and personal skills. The experience will enhance their engineering ability, maturity and eventual employability.
Research Studies and Project Management
This module is designed to equip students with the appropriate research and project management skills needed to complete a project within the Computing domain. Firstly, the module provides an underpinning foundation of research concepts, methods and techniques necessary for project development and delivery. Secondly, the different stages of the research process are demonstrated. Thirdly, the students employ skills developed during the module to create a set of project deliverables such as project plan and proposal, critically reviewed literature papers, literature review and project presentation. Embedded in all these activities is the reinforcement of the need for adhering to recognised ethical standards and taking a professional approach to carrying out research.
Final Year Project
Students are required to undertake a major project during the final year of the course. The module offers students an opportunity to develop a realistic and meaningful piece of work during their final year. This module allows a chosen subject area to be researched in depth and a solution developed as a consequence. Students will have the opportunity to integrate and apply the learning achieved from other modules in the course. The module runs during both semesters and allows students to develop a comprehensive approach to all aspects of working on a large project. The project encourages innovation and creative thinking in the development of the solution. It also develops the entrepreneurial mindset, which can influence the challenges undertaken and final decisions made.
Programmable Logic Systems
This module is designed to reinforce and further develop a student's digital design and implementation skills. It is presented via lectures, tutorials, seminars and practicals and is assessed using continuous assessment methods.
This module provides students with a graduate level understanding of semiconductor materials and microelectronics circuit performance. Additionally students will be analytically proficient in microelectronic circuit analysis techniques and be able to produce design equations for temperature stability of these circuits. The module will teach the concept of interconnect delay and noise using models of delay lines circuit noise. All teaching material will be supported with lab simulations.
Electrical & Electronic Machines
The module covers the theoretical and practical aspects of Power Electronics and Electrical Machines combined with the required new power semiconductors.
Electrical Energy & Smart Grids
The module covers theoretical and practical aspects of power systems with a large proportion of decentralised energy production.
We recognise a range of qualifications for admission to our courses. In addition to the specific entry conditions for this course you must also meet the University’s General Entrance Requirements.
In this section
Grades BBB to include one from GCE A Level Mathematics, Further Mathematics, Physics, Chemistry, Technology and Design, Design and Technology, Double Award Science/Applied Science, Engineering, or Electronics.
Desirable Subject Offer:
For applicants offering Maths, Further Maths or Physics in GCE A Level, a one grade reduction will be applied at the time of offer.
Applied General Qualifications
The Faculty of Computing, Engineering and the Built Environment accept a range of alternative combinations of qualifications such as:
BTEC Level 3 QCF Extended Diploma in a relevant Engineering subject area with overall award profile of DDM to include 9 unit distinctions. Also requires a Merit in either Mathematics for Engineering Technicians or Further Mathematics for Engineering Technicians, ANDa Merit in Mechanical Principles and applications.
BTEC Level 3 RQF National Extended Diploma in a relevant Engineering subject area with DDM overall award grades to include a Merit in Engineering Principles and Merit in Calculus to Solve Engineering Problems.
A Levels with;
BTEC Level 3 QCF Subsidiary Diploma;
BTEC RQF National Extended Certificate does not satisfy the subject requirement for this course and will only be considered when presented with an A Level in one of the specified subjects (please refer to A level section);
BTEC Level 3 QCF 90-credit Diploma
BTEC Level 3 RQF National Foundation Diploma does not satisfy the subject requirement for this course and will only be considered when presented with an A Level in one of the specified subjects;
BTEC Level 3 QCF Diploma or BTEC Level 3 RQF National Diploma.
Irish Leaving Certificate
Grades H3,H3,H3,H3,H3 to include Mathematics and one other subject from Physics, Chemistry, Physics/Chemistry, Biology, Technology, Engineering or Technology and Design.
English at Grade H6 or above (Higher Level) or Grade O4 or above (Ordinary Level) if not sitting at Higher Level is also required.
The Scottish Highers requirement for this course is BBBCC (to include minimum of BB in Mathematics and a science subject).
Scottish Advanced Highers
The Scottish Advanced Highers requirement for this course is CCC (to include Mathematics and a science subject).
Overall International Baccalaureate Diploma requirement is minimum 26 points (13 at Higher Level to include Grade 5 HL Mathematics and another HL Science subject)
Higher or Subsidiary level in English Language required at Grade 4 or above.
Access to Higher Education (HE)
Successful completion of an Ulster University validated Access route in Science/Technology with Overall mark of 70% and 70% in NICATS Mathematics (level 2).
GCSE Mathematics Grade A/7 (or equivalent) if offering GCE A Level Design and Technology, Engineering or Electronics as the specified subject for this course.
GCSE Mathematics Grade C/4 or above (or equivalent) if offering any of the other specified subjects (Maths, Further Maths, Physics, Chemistry, Double Award Science/Applied Science)
GCSE Grade C (or above) in English Language (or equivalent).
Please note that for purposes of entry to this course the Level 2 Essential / Key Skill in Application of Number is NOT regarded as an acceptable alternative to GCSE Maths.
English Language Requirements
English language requirements for international applicants
The minimum requirement for this course is Academic IELTS 6.0 with no band score less than 5.5. Trinity ISE: Pass at level III also meets this requirement for Tier 4 visa purposes.
Ulster recognises a number of other English language tests and comparable IELTS equivalent scores.
Additional Entry Requirements
OCR/Cambridge Technical Combinations
OCR Nationals and Cambridge Technical qualifications do not satisfy the subject requirements to this course and will be accepted as grade only when presented with an A Level in one of the specified subjects (please refer to A Level section).
HNC requirement is overall Distinction in an Electrical, Electronic, Mechanical or Manufacturing Engineering subject (plus GCSE Maths grade C or an acceptable alternative Mathematics module) will be considered for year 1 entry only.
HND requirement is overall Merit in an Engineering subject to include a Merit in either Level 4 or Level 5 Analytical Methods module (plus GCSE Maths grade C or an acceptable alternative Mathematics module). Applicants may be considered for year 2 entry where the curriculum sufficiently matches that of Ulster University full-time year 1 course.
Ulster Foundation Degree
Pass in a relevant subject area with overall 55% and minimum 55% in all taught level 5 modules plus 55% in the Level 4 Mathematics module within the Foundation Degree (Must have GCSE Maths at Grade C or equivalent). Applicants will normally be considered for year 2 entry to the linked Honours degree.
For further information regarding all of the above qualifications please contact Admissions staff from the contact details section below.
Entry equivalences can also be viewed in the online prospectus at http://www.ulster.ac.uk/apply/entrance-requirements/equivalence.
Teaching and learning assessment
Formal lectures are supplemented by tutorials and laboratory investigations, as appropriate. Practical hands on laboratory sessions are an integral part of many modules throughout all years of the course. Case studies, groupwork and mini-projects are also extensively used. In the final year there is a major individual project.
Generally, a combination of continuous assessment and examination is employed in each module. Continuous assessment includes class tests, library and laboratory based assignments, and individual and group project work. Some modules across all years of the course are continuously assessed.
Exemptions and transferability
Transfer between this course and other similar courses within the Faculty of Computing, Engineering and the Built Environment may be possible on the basis of academic performance.
Exemption from parts of the course may be considered based on appropriate performance in a related, designated course or other approved experiential learning (APEL).
The course has been designed to enable students who graduate with a good honours degree to apply for postgraduate study towards a PhD, MSc, MRes or other higher qualification.
Careers & opportunities
In this section
Job prospects in a wide range of engineering industries are excellent with the majority of graduates finding employment within six months of graduation. Graduates with BEng Hons, first class or upper second class award all satisfy the requirements for a wide range of postgraduate research posts and scholarships.
Work placement / study abroad
In Year 3, the student will undertake a period of paid placement in an industrial or academic setting. Placement is compulsory and seen as an integral part providing the student the opportunity to develop into a junior engineer.
Fees and funding
In this section
Fees (per year)
Important notice - fees information
Fees illustrated are based on 19/20 entry and are subject to an annual increase. Correct at the time of publishing. Terms and conditions apply. Additional mandatory costs are highlighted where they are known in advance. There are other costs associated with university study.
Visit our Fees pages for full details of fees
- Northern Ireland & EU:
- England, Scotland, Wales
and the Islands:
£9,250.00 Discounts available
- £14,060.00 Scholarships available
Scholarships, awards and prizes
This course is suitable for a number of student support awards. Please contact the course director for further information.
Faculty Prizes can be viewed at: ulster.ac.uk/academicoffice/prizes.htmland follow the links to the Faculty of Computing, Engineering and the Built Environment.
Additional mandatory costs
Tuition fees and costs associated with accommodation, travel (including car parking charges), and normal living are a part of university life.
Where a course has additional mandatory expenses we make every effort to highlight them. These may include residential visits, field trips, materials (e.g. art, design, engineering) inoculations, security checks, computer equipment, uniforms, professional memberships etc.
We aim to provide students with the learning materials needed to support their studies. Our libraries are a valuable resource with an extensive collection of books and journals as well as first-class facilities and IT equipment. Computer suites and free wifi is also available on each of the campuses.
There will be some additional costs to being a student which cannot be itemised and these will be different for each student. You may choose to purchase your own textbooks and course materials or prefer your own computer and software. Printing and binding may also be required. There are additional fees for graduation ceremonies, examination resits and library fines. Additional costs vary from course to course.
Students choosing a period of paid work placement or study abroad as part of their course should be aware that there may be additional travel and living costs as well as tuition fees.
Please contact the course team for more information.
Central Admissions Magee
International Admissions Office
Course Director: Dr JP Quinn
For more information visit
- The University endeavours to deliver courses and programmes of study in accordance with the description set out in this prospectus. The University’s prospectus is produced at the earliest possible date in order to provide maximum assistance to individuals considering applying for a course of study offered by the University. The University makes every effort to ensure that the information contained in the prospectus is accurate but it is possible that some changes will occur between the date of printing and the start of the academic year to which it relates. Please note that the University’s website is the most up-to-date source of information regarding courses and facilities and we strongly recommend that you always visit the website before making any commitments.
- Although reasonable steps are taken to provide the programmes and services described, the University cannot guarantee the provision of any course or facility and the University may make variations to the contents or methods of delivery of courses, discontinue, merge or combine courses and introduce new courses if such action is reasonably considered to be necessary by the University. Such circumstances include (but are not limited to) industrial action, lack of demand, departure of key staff, changes in legislation or government policy including changes, if any, resulting from the UK departing the European Union, withdrawal or reduction of funding or other circumstances beyond the University’s reasonable control.
- If the University discontinues any courses, it will use its best endeavours to provide a suitable alternative course. In addition, courses may change during the course of study and in such circumstances the University will normally undertake a consultation process prior to any such changes being introduced and seek to ensure that no student is unreasonably prejudiced as a consequence of any such change.
- The University does not accept responsibility (other than through the negligence of the University, its staff or agents), for the consequences of any modification or cancellation of any course, or part of a course, offered by the University but will take into consideration the effects on individual students and seek to minimise the impact of such effects where reasonably practicable.
- The University cannot accept any liability for disruption to its provision of educational or other services caused by circumstances beyond its control, but the University will take all reasonable steps to minimise the resultant disruption to such services.